GF-1650 dry type laminating machine

GF-1650 dry type laminating machine:

The drying laminating machine is refer to the advantage of JAPAN FUJI MACHINE to be developed, it is suitable for BOPP, PET, NYLON, CPP, CPE, ALUMINUM FOIL two layer or multi layer laminated, it can be good quality packing material with high strength, high protection and resistance steam character

Technical parameters:

Specification:

1.Overall machine adopt constant tension control and protection to improve overall machine reliability.
2.Unwinding, gluing coating, laminating traction, rewinding four section closed loop constant tension control
3.Gluing is gravure coating method, coating blade shaft adopt heavy type double shaft machine independent moving, blade adjust is manual by pneumatic type, angle is adjusted freely, coating quantity is up to gravure roller mesh, different coating quantity can use different mesh gravure roller
4.four section  side hinge type constant temperature oven, in/out air layering, negative pressure design, strong wind power, drying completely, secondary return air, it not only save energy, but also reduce remain glue contant
5.Oven inner guide roller adopt passive and active type, drive adopt synchronous belt wheel drive type to avoid the material stretch and distortional.
6.First and second unwinding(base material and liner) adopt EPC webguide, the film output of the oven adopt EPC inclined webguide
7.High precision gravure roller coating system, pneumatic blade, uniformity roller, glue cycle device
8.High precision back press three roller type laminated device, laminating roller adopt interlayer conduction oil cycle by electrical pipe heating, to make the laminating more uniformity and tight.
9.Coating , laminating adopt double frequency block drive
Use the cooling roller to make the laminated film more smooth and evenness.
10.Rewinding unit use two sets AC vector motor by inverter control, pneumatic type back      press roller blade cutting and auto rewinding to reduce destroy
11.Rewinding and unwinding shaft adopt expand type air shaft to load and unload the material more convenient

the laminating machine can customize according customers' requests:
A.On the basis of customer’s different requirment to order the special machine ( effective width 300-2000mm)
B.Rewinding and unwinding frame : manual lifting type single station,hydraulic lifting type single station, electrical rotation type double station, electrical zipper climbing type double station, electrical rotation wheel type double station can be choosed by customer.

　　Through the above understanding, you should have a more understanding of coating machine, laminating machine, gravure printing press, Slitter, if you have other questions, you may contact our online customer service:+86-13958857367。