Welcome to Ruian Haoyu Machinery Co.,Ltd
24-Hour Hour Hotline
+86-0577-65165266
+86-13958857367

Common fault and elimination of coating machine

Author:adminHits:1460 Time:2020-12-12 22:07

Common faults and troubleshooting of coater:

Wear of the transmission part of the coating machine

Coating machine transmission parts wear problems appeared in the operation process of the Central Standing Committee, such as coating machine dryer, coiling roller axle end wear of bearing chamber wear etc.. Repair of the traditional methods of welding, thermal spraying, brush plating and so on, but there are some drawbacks: welding makes the part surface reach very high temperature, causing deformation or crack shaft fracture can lead to serious plating; not too thick, and the pollution is serious, the application is limited. With the development of technology, polymer composites can be used to solve the above problems, in which the technology system of Mei Jiahua is more mature. The material has good adhesion and compressive strength, and it can not be disassembled to repair the wear of the coater. At the same time, because of its metal deficiency, it can absorb the shock and vibration of the equipment well and avoid two times of wear.

Damage of the concrete foundation of the coating machine

Due to corrosion, aging, equipment vibration and other factors, the coating machine will also cause damage to the concrete base and other parts, resulting in loosening of bolts in the fastening equipment, which seriously affects the production. The traditional concrete pouring method will make the repair time lengthened and the enterprise is difficult to accept. Polymer composite material is also very good solution to this problem, impact resistance, compressive strength of the material itself is far greater than the concrete materials at present, but also stick to the steel and other rough surface, can fast curing, is a new scientific research base of concrete damage repair coating machine.

  Through the above understanding, you should have a more understanding of coating machine, laminating machine, gravure printing press, Slitter, if you have other questions, you may contact our online customer service:+86-13958857367


Through the above understanding, you should have a more understanding of coating machine, laminating machine, gravure printing press, Slitter, if you have other questions, you may contact our online customer service:+86-13958857367
 

Recommendation scheme

TB-1200 double side coating laminating machine

Feature:TB-1200 double side coating laminating machine 一 Functionwe draw into foreign advanced coating machine technology and together with our own many years of experience .the machine adopt both side gravure coating method, it widely used in the ...

TB-1600 canvas/photopaper coating laminating machine

Feature:TB-1600 canvas/photopaper coating laminating machine 一 Functionwe draw into foreign advanced coating machine technology and together with our own many years of experience .it adopt comma blade and double roller two kind coating method, it widel...

TB-1300 multi-function coating laminating machine

Feature:TB-1300 multi-function coating laminating machine一 Functionwe draw into foreign advanced coating machine technology and together with our own many years of experience .it adopt comma blade blade and gravure roller two kind coating method,comma bl...

TB-800 double side conducting film coating machine

Feature:TB-800 double side conducting filmcoating machine:一 Functionwe draw into foreign advanced coating machine technology and together with our own many years of experience . it widely used in the production of any kind of release film二 ParameterT...

Ranking of similar articles

Latest information articles

National free service hotline

+86-0577-65165266

MS.Sala+86-13958857367

在线客服