How to clean the coating machine

How to clean the coating machine:

The coating tool head cleaning: after the equipment is heated, dry gauze is used to wipe. The cleaning roller shaft: stainless steel roller use clean dry gauze dipped in 75% alcohol wipe, if there is surface glue, use dry gauze dipped in 1620 solvent / ethyl acetate solvent wipe; rubber roller surface of the glue shall not use organic solvent, so as to avoid damage to the rubber roller, curing adhesive should be used in addition to the strong viscosity. The outer surface of the equipment; cleaning method: dip the clean dry gauze with 75% alcohol. For batch cleaning: hot melt coating machine box and cleaning hose (suitable for replacing glue type and coating): after adding new emptying the original glue glue 2~3Kg, heated to completely melt after emptying, then add new glue, completely melting off after at least 1Kg officially began production.

Coating tool head cleaning (suitable for replacement of glue model and coating mode): after the equipment is heated, dry gauze is used to wipe. The roller shaft is coated with compound position, wipe the surface dust with clean dry gauze, and if there is glue on the surface, it is not allowed to use organic solvent to avoid damaging the rubber roller shaft, so we should use sticky strong sticky glue to remove it.

The cleanliness of the corona device: after confirming the power off, clean the dry gauze and dip it in 75% alcohol. Hot melt coating machine fixed cycle cleaning: coating and glue class change to clean the hot melt coating machine coating head, when cleaning in the glue solidified before the coating head removed, with a dry gauze dipped in 1620 solvent coating head and wipe clean. In the process of production, when the equipment is shut down, a clean gauze will be used to wipe off the overflow of the glue.  Half a month cleaning hot-melt adhesive coating machine rubber box filter cleaning. Hot melt coating machine coating head cleaning filter. More than a month shutdown, all coating equipment are required in accordance with the above, every day for half a month, and the number of non fixed period the contents and requirements of clean cleaned can be used for hot melt coating machine; glue, glue to be added to the 30Kg after emptying the original about white mineral oil to dissolve residual glue, after emptying to add about 30Kg white mineral oil dissolved again, completely emptying after use.

　　Through the above understanding, you should have a more understanding of coating machine, laminating machine, gravure printing press, Slitter, if you have other questions, you may contact our online customer service:+86-13958857367。