TB-1300silicone oil/release film coating machine:

main technical parameters:

1.overall machine adopt 4frequency motor control,the tension auto-control,keep the speed synchronous.
2.unwinding frame independently,adopt frequency motor inverter control tension.
3.gravure roller coating method:blade shaft adopt heavy double shafts machine swing independetly,blade adjustment is manual with pneumatic type,angel adjust freely,coating thickness depending to the gravure roll mesh,different coating quantity need change different mesh rollers,
4.oven is 28m for 7sections independently control temperature,heating method is electrical heating hot air intake dry system,heater outside setup,heating pipe adopt stainless steel heating sink,can adjustment inner cycle inhale and exhaust air device.Intake and out with strong wind,dry thoroughly.
5.oven inner guide wheel synchronous with main machine,drive adopt synchronous belt drive type,reduce material stretch and deformation,cylinder pneumatic open oven and film pass operation panel so that worker can work very easily.
6.The tension between coating roller and traction steel roller adopt float swing arm by PLC auto-control.
7.auto-length and speed meter device
8.webguide adopt EPC air sensitive register to assure the trimness when rewinding .
9.unwinding and rewinding adopt key type air shaft,in order to loading and unloading easily.
10.high presicion up press traction device, steel roller cooling adopt water cycle to make the film surface more smooth and neat. to reach good cooling effect.
 

coating machine can customize according to customers' requests:

A According to the different requirements of the customers special the customized machine (limited width of 300-2500mm)
B rewinding and unwinding frame : manual lift up type single station, hydraulic lift type single station, electrical rotation double station, electrical chain climbing type double station, electrical rotation wheel pan type double station can be choosed by customer
C oven heating method: electric heating, conduction oil heating, steam heating etc can be choosed by customer
D coating method: gravure roller coating, double rollers coating, three rollers coating, five rollers coating, comma blade coating, air knife coating etc can be choosed by customer
E work speed is proportion with coating material quality, coating thickness, oven length, drying temperature

　　Through the above understanding, you should have a more understanding of coating machine, laminating machine, gravure printing press, Slitter, if you have other questions, you may contact our online customer service:+86-13958857367。