TB-1000 type high temperature resistance adhesive tape coati

TB-1000 type high temperature resistance adhesive tape coating machine  details

The machine adopt comma blade and anilox roller two kinds coating methods,comma blade coating method used for adhesive tape glue coated.Anilox roller coating method used for silicone oil coated,widely used in production aluminum  tape，kraft paper tape,BOPP adhesive tape,release paper and release film ect. coating products.

The machine can used for production as follows:

Main technical parameters:
 

specifications:

1.overall machine adopt 5 frequency motor control,the tension(unwinder,coating,traction,rewinder) adopt JAPANESE MITSHUBISHI PLC to control active,through man machine interface touch screen to control and display to improve machine tension reliability.

2.unwinder frame model is single type hydraulic life and adopt magnetic powder automatic tension control.

3.comma blade roller clutch adjustment adopt pneumatic swing arm type,swing arm with fine adjust device control,glue quantity thickness by feeler gauge control.

4.anilox roller coating method, coating blade shaft adopt heavy double shaft type machine independently moving,blade adjust by manual with pneumatic type, angle is adjusted freely, coating quantity is depend the gravure roller mesh, different coating quantity can change different mesh gravure roller.

5.two layers oven:up layer 27m for 9sections independent control temperature,down layer 9m for 3section independent control,conduction oil cycle heating,hot wind intake dry system,the adjustment inner cycle inhale and exhaust air device,intake and out with strong air,dry thoroughly.

6.oven inner guide wheel is active synchronous with the mainframe,drive adopt synchrous belt wheel drive guide wheel to assure synchronous to reduce material stretch and defomation,cylinder pneumatic open oven and film pass operation panel so that worker can work very easily.

7.the tension between the coating rolller to traction steel roller synchronous adopt swing arm type active control by PLC.

8.automatic length and speed meter device.

9.webguide adopt EPC air sensitive register to assure the trimness when rewinding

10.unwinding and rewinding adopt key type air shaft for easily operate when loading and unloading the material,air shaft take in and off adopt safety lock type.

11.high presicion up press traction device,steel roller cooling adopt water cycle to make the film surface more smooth and neat to reach good cooling effect.
12.rewinding frame is single station hydraulic lift type,rewinding adopt frequency motor,vector frequency inverter control by PLC. 

Remark
 
A According to the different requirements of the customers special the customized machine (limited width of 300-2000mm)
B rewinding and unwinding frame : manual lift up type single station, hydraulic lift type single station, electrical rotation double station, electrical chain climbing type double station, electrical rotation wheel pan type double station can be choosed by customer
C oven heating method: electric heating, conduction oil heating, steam heating etc can be choosed by customer
D coating method: gravure roller coating, double rollers coating, three rollers coating, five rollers coating, comma blade coating, air knife coating etc can be choosed by customer
E work speed is proportion with coating material quality, coating thickness, oven length, drying temperature

　　Through the above understanding, you should have a more understanding of coating machine, laminating machine, gravure printing press, Slitter, if you have other questions, you may contact our online customer service:+86-13958857367。